Access photos and videos on a router's drive from iPhone

Many routers can share a drive plugged into their USB port with your home network. Turn on the router's file sharing, then open it with Connect to Computer or NAS in Cuka and add the folder that holds your photos and videos.

Before you start

  • A router with a USB port that supports file sharing.
  • Your iPhone or iPad is on this router's network.
  • The free plan includes one external folder, and network folders count toward it. If you've already added another folder, tapping Connect to Computer or NAS first offers Pro; you can also remove sources you no longer use in Settings › Access External Photos.

1Turn on file sharing on your router

  1. Plug a USB flash drive or external hard drive into the router's USB port.
  2. In the router's app or admin page, find the USB storage or file sharing settings and turn on network file sharing (it may be called Samba, SMB or network sharing). Where it is depends on the brand and model; check the router's manual.
  3. If you can set up an account, set a user name and password and allow writing. With read-only guest access, Cuka can only browse, not clean up.
  4. Note the router's admin address, for example 192.168.1.1 or 192.168.0.1.

2Connect to your router in Cuka

  1. Open Cuka, tap the library name at the top of Home to open the source menu, and choose Connect to Computer or NAS. You can also find it in Settings › Access External Photos.
  2. The first time, iOS asks whether Cuka can find and connect to devices on your local network. Choose Allow.
  3. Enter the router's address in Server, for example 192.168.1.1.
  4. Enter the User Name and Password (if you set up an account; leave User Name empty for guest-only access) and tap Connect.
  5. In the Shared Folders list, tap the folder you shared, open the folder that holds your photos and videos, and tap Add This Folder. Cuka scans and analyzes the photos and videos where they are on your router; you can keep browsing in the meantime.

Frequently asked questions

Seeing "Couldn't reach this server"?

Make sure your phone is on this router's network, the drive is plugged in and file sharing is turned on. Guest Wi-Fi usually can't reach the router's drive.

Seeing "Cuka isn't allowed to use the local network"?

On your iPhone or iPad, turn on Cuka in Settings › Privacy & Security › Local Network, then go back to Cuka and try again.

Still can't connect to an old router or NAS?

Some older devices only support SMB1, but Cuka needs SMB2 or later. Turn on SMB2 in the device's settings or update its firmware. If that isn't possible, connect the drive directly to your phone instead; see the "USB & external drives" guide.

Can browse but can't clean up?

You can't clean up when connected as a guest or when the share is read-only. Set up an account on the router with write access, then connect with that user name and password.

Do videos need to download to my phone first?

No. When you play a video from the router's drive, Cuka reads only the part that's playing, and nothing is copied to your phone. On weak Wi-Fi, high-bitrate videos may stutter; moving closer to the router or switching to 5 GHz Wi-Fi helps.

Can I access it away from home?

This connection only works on the same network. When you leave your home or office network, the source shows as offline; it picks up again when you're back on that network.

Good to know

  • Photos and videos stay where they are. Cuka indexes and analyzes them on your device and never uploads them to Cuka's servers.
  • Cleaned-up files first move to a .cuka-trash folder in that source, and you can restore them from Cuka Trash; when you empty the trash, they're permanently deleted from the computer or storage device.
  • Read-only folders can be browsed but not cleaned up. To clean up, give the shared folder write permission and turn off the card's write-protect switch.
  • The free plan includes up to one external folder, and network folders count toward it; upgrade to Pro to add more.
  • Keep the device connected while browsing and cleaning up. If it disconnects, the source shows as offline; reconnect to continue.

← iOS Connection Guides